asme pald-2005與2009 區別

《asme pald-2005與2009 區別》由會員分享，可在線閱讀，更多相關《asme pald-2005與2009 區別（10頁珍藏版）》請在技術文庫上搜索。

1、ASME PALD 2005 ASME PALD 2009- SAFETY MARKING (a) Study, understand, and follow all instructionsbefore operating this device.(b) Do not exceed rated capacity.(c) Use only on hard, level surfaces.(d) CASME PALD 2005 ASME PALD 2009- SAFETY MARKING (a) Study, understand, and follow all instructionsbefo

2、re operating this device.(b) Do not exceed rated capacity.(c) Use only on hard level surface.(d) LocASME PALD 2005 ASME PALD 2009- SAFETY MESSAGES NO ALTERATIONS SHALL BE MADE TO THISPRODUCT.same as 2005 editionpart 15forklift jacks- PROOF LOAD TEST without internal load limiting device, proof load

3、ASME PALD 2005 ASME PALD 2009- SAFETY MESSAGES (a) Ramps are not to be used to simultaneouslysupportboth ends or one side of a vehicle.(b) Maximum allowable tire width is (manufacturerto specify for eASME PALD 2005 ASME PALD 2009- SAFETY MARKING (a) Study, understand, and follow all instructionsbefo

4、re operating this device.(b) Do not exceed rated capacity.(c) Use only on hard level surface.(d) LoaASME PALD 2005 ASME PALD 2009- SAFETY MESSAGES (a) Apply load as close to the vertical portion of thelifting member as possible.(b) Before moving the load, assure that the load iscentered and secured

5、ASME PALD 2005 ASME PALD 2009- SAFETY MARKING (a) Study, understand, and follow all instructionsbefore operating this device.(b) Do not exceed rated capacity.(c) Use only on hard level surface.(d) LoaASME PALD 2005 ASME PALD 2009- SAFETY MARKING (a) Study, understand, and follow all instructionsbefo

6、re operating this device.(b) Do not exceed rated capacity.(c) Use only on hard level surface.(d) UseASME PALD 2005 ASME PALD 2009part  3engine  stands(34125)- PROOF LOAD TEST without internal load limiting device, proof load is150% of the rated capacitywith internal load limiting device, proof load ASME PALD 2005 ASME PALD 2009issurance date簽發時間 May 31,2006 May 21.2010effective date May 31,2007 May 21.2011next edition 2008 2012part  1hydraulic  hand  jack(all the bottle jack)- ANGULAR LOAD TEST